Diver
INSTALLAZIONE FISSA A BORDO

FIXED INSTALLATION ONBOARD

Dalla ormai ventennale esperienza della Boats & Watergames nella costruzione di generatori d’aria per immersioni per le basse profondità, nasce, specificamente per i cantieri navali, Diver, una macchina in grado di offrire un valore aggiunto alle vostre imbarcazioni di serie.

In questi vent’anni di produzione dei generatori JACK, migliaia di diportisti l’hanno acquistato come accessorio indispensabile per la propria imbarcazione.

Diver nasce per essere installato come primo impianto. Si tratta di una macchina di semplicissimo utilizzo, leggera, di poco ingombro, realizzata in acciaio INOX AISI 316 e soprattutto ECONOMICA. Diver è l’unico strumento che permette l’immersione in qualsiasi momento senza l’ausilio di ulteriore attrezzatura subacquea.

Basta, infatti, semplicemente avviare Diver ed il diportista sarà pronto per:

- ispezionare e disincrostare la carena
- sbloccare ed ispezionare le eliche, liberandole da cime, alghe,…
- disincagliare l'ancora
- effettuare controlli ed interventi sul timone
- ispezionare e ripulire le catene delle boe
- recuperare oggetti caduti fuoribordo nei porti
- controllare e ripulire le prese a mare

Per poter utilizzare Diver è sufficiente conoscere le tecniche di immersione in apnea. Diver consente l'immersione di una persona fino a 10 metri di profondità. Il funzionamento è ininterrotto, anche se sono consigliabili pause ogni 30 minuti. Basta avviare Diver e tuffarsi con tubo ed erogatore.

La fornitura standard prevede, oltre alla macchina, gli accessori per realizzare l'impianto fisso a bordo (tubo di lunghezza a richiesta, completo di innesti, vano porta innesto rapido), un tubo da 15 mt con erogatore, libretto d'uso e manutenzione
________________________________________

Dati tecnici:

Compressore con 2 teste a V con membrane a secco
Alimentazione a 12 V tramite batteria
Motore 280 W
Assorbimento max 20 A
Capacità del serbatoio: 1 lt
Filtro a carboni attivi
Involucro e carter in acciaio inox aisi 316
Tubo esterno, innesti rapidi, erogatore in materiale alimentare
Portata effettiva a 2 bar 3000 l/h

Diver is an air generator for diving that adds value to the boats of your range. Is has been specifically developed for the shipyard, after 20-years experience in the manufacture of air generators for diving within small depth. In these 20 years thousands of boat-owners have bought JACK generators as an essential optional to be kept on board.

Diver has been studied to be permanently installed onboard, it is very easy to use, light, not cumbersome, made in stainless steel AISI 316 and CHEAP. Diver is the only machinery that allows easy and immediate diving without any additional diving equipment.

By just switching Diver on the boat owner will be ready to:

- inspect and descale the hull
- inspect the propeller and free it from lines and seaweed
- free the anchor
- check and mend the rudder
- inspect and clean buoy chains
- recover objects fallen over-board in port
- check and clean water intakes

Anyone who knows the technique of breath-held diving can safely use Diver. Diver allows one diver to dive down to 10 meters. It works non-stop, although is it advisable to stop every 30 minutes to let the compressor cool down. You just switch Diver on and dive with your tube and regulator.

The standard kit includes: Diver, the parts for the on-board installation (hose, long as required, snap-on connections, snap-on connection housing), one 15-mt hose with regulator, use and maintenance manual.
____________________________________________

Technical data:

Compressor with two V-heads with dry diaphragms
12 V battery supply
Motor 280 W
Max absorption 20 A
Tank capacity lt. 1
Active carbon filter
Stainless steel casing
Atoxic mouth piece, air tube and snap-on connections
Effective rate of flow at 2 bar: 3000 l/h